Mega Power Generator Sets (24kW - 60kW) | Dynamic Power Marine & Industrial Hardware

Specification

Bore and stroke	100 X 115 mm (36 KW/ 39.6 KW) 100 X 115 mm (36 KW/ 39.6 KW) 100 X 115 mm (50 KW/ 55 KW) 105 x 125 mm (67 KW/ 74 KW) 105 x 125 mm (67 KW/ 74 KW)
Displacement	3.6 L (36 KW/ 39.6 KW) 3.6 L (36 KW/ 39.6 KW) 3.6 L (50 KW/ 55 KW) 4.33 L (67 KW/ 74 KW) 4.33 L (67 KW/ 74 KW)
Cylinder Number	4
Compression Ratio	16.4:1
Governor Method	Mechanical
Aspiration	Natural Aspiration & Turbo
Emission Standard

MAIN DIMENSIONS & WEIGHT (mm & kg)
Genset Model	Length	Width	Height	Weight
24 GF	2100	900	1150	950
30 GF	2100	900	1150	1000
40 GF	2250	900	1200	1050
50 GF	2400	900	1200	1350
60 GF	2400	900	1200	1400

Ratings

GENSET
Model	24 GF	30 GF	40 GF	50 GF	60 GF
Standby Output (KW/KVA)	26.4 KW/ 33 KVA	33 KW/ 41.25 KVA	44 KW/ 55KVA	55KW/ 68.75 KVA	66 KW/ 82.5 KVA
Prime Output (KW/KVA)	24 KW/ 30 KVA	30 KW/ 37.5 KVA	40 KW/ 50 KVA	50 KW/ 62.5 KVA	60 KW/ 75 KVA
Voltage	220 V (Other Voltage Accept such as 440V, 480V)
Phase	3 Phase / (1- Phase as optional)
Rated Power Factor	0.8 or (1.0)
Frequency	60 Hz
Maximum Output Current (A) @ 1ø, 220V	79 A	98 A	131 A	164 A	197 A
Type	SUPERSILENT ( ≤ 75 dBA Noise level (A) @ 7m)

ENGINE
Brand	MEGAPOWER
Rated/ Maximum Output (KW)	36 KW/ 39.6 KW	36 KW/ 39.6 KW	50 KW/ 55 KW	67 KW/ 74 KW	67 KW/ 74 KW
Rated Speed	1800 RPM
No. of Cylinders	4
Type	Water-cooled, in-line 4-cycle, direct injection
Air intake method	Natural Aspiration	Natural Aspiration	TURBO	TURBO	TURBO
Bore & Stroke (mm)	100 x 115 mm	100 x 115 mm	100 x 115 mm	105 x 125 mm	105 x125 mm
Compression ratio	18:01
Fuel Consumption @ 100% load	6 L/hr	6 L/hr	10 L/hr	13 L/hr	15.5 L/hr
Displacement (Liters)	3.6 L	3.6 L	3.6 L	4.33 L	4.33 L
Distilled Water/ Coolant Capacity (Liters)	16 L	16 L	16 L	17 L	17 L
Exhaust Highest Temperature (˚C)	≤ 600
Lube-oil pan capacity (Liters)	7.25 L	7.25 L	7.25 L	9 L	9 L
Voltage for start (V)	12V
Governor Method	Mechanical

ALTERNATOR
Brand	MEGA
Excitation	Bruthless
Insulation Class	H
Protection Class	IP22
Connection Type	Re-connectable
Voltage Regulation	≤ 1.5%
Waveform Distortion	No load <1.5% & non-distorting balanced linear load < 5%
THF/ TIF	< 2%/50%

Features

Control Module Specifications
The GU3311 is an Auto Mains Failure Control Module
– Back-lit LCD display
– 3 Phase generator and 3 Phase Mains monitoring
– Monitoring speed, frequency, voltage, current, oil pressure, coolant temperature and fuel level
– Display warning, shutdown and engine status information
– Hours counter provides accurate information for monitoring and maintenance

Remarks
Prime Rating
These ratings are applicable for supplying continuous electrical power (at variable load) in lieu of commercially purchased power. There is no limitation to the annual hours of operation and this model can supply 10% overload power for 1 hour in 12 hours.
Standby Rating
These ratings are applicable for supplying continuous electrical power (at variable load) in the event of a utility power failure. No overload is permitted on these ratings. The alternator on this model is peak continuous tested (as defined in 8528-3).

Standard Reference Conditions
Note: Standard reference conditions of 25 ˚C (77 ˚F) Air Inlet Temp, at 100 m (328 ft.) A. S. L. With 30% relative humidity. The fuel consumption data are at full load with diesel fuel with specific gravity of 0.85 and in compliance with to BS2869: 1998, Class A2.

Mega Power Generator Sets (24kW – 60kW)

Specification

Ratings

Features

Data Sheet